Windows dns forward lookup zone not updating
Configuring Reverse Lookup Zones Now, we need to create a matching reverse lookup zone. On the Reverse Lookup Zone Name page, make sure IPv4 is selected, and then click Next.7. On the Completing The New Zone Wizard page, click Finish. Right-click the Network connection and choose Properties.5.This will handle reverse resolution for our subnet. On the Reverse Lookup Zone Name page, in the Network ID field, type the start of the subnet range of your network (in this case, 192.168.1.x), and then click Next.8. Now we need to enable IPv6 so we can offer domain name resolution for clients who may use IPv6 as opposed to IPv4. Double-click Internet Protocol Version 6 (TCP/IPv6).6. Click the radio button for Use The Following IPv6 Address.
Without a reverse lookup zone and PTR record, I would not be able to do this. Unless you host your own email server or have an application that requires it may not be required.Reverse lookup zones are used to resolve IP addresses to a hostname.For reverse lookup zones to work they use a PTR record that provides the mapping of the IP address in the zone to the hostname.Some of the properties you can modify include:• Dynamic Updates: The ability for clients to automatically update DNS records.• Zone Type: You can change a zone type from Primary, to Secondary, or to Stub Zone.If Active Directory is installed, you can also make the zone Active Directory–integrated.• WINS integration: This is where you can involve WINS resolution with DNS resolution.• Name Servers: You can add the names and IP addresses of servers that have the rights to create copies of the DNS zone.• Zone Transfer: Here, you can specify whether the zone can be transferred to another DNS server.